HOYT TENACITY CARBON NEED A MODULE TO CHANGE FROM 24" T

[STEEGARDIN719]

HAVE A HOYT TENACITY CARBONITE I BELIEVE IT TAKES COMMAND MODULES NEED TO CHANGE TO 26 " DRAW//ANY ONE HAVE ANY OR KNOW ANYTHING ABOUT THIS BOW..

[DanceswithDingoes]

Command cams have a 3" draw range built in from memory and there were 3 different sizes of cams. What is the draw length now? And say hi to that big bronze CU buffalo I urinated on after a bender in PO Pears :roll:

[STEEGARDIN719]

IT'S AT 24" BUT THERE IS A MODULE ON BOTH CAMS WITH THE NUMBER 1 ON THEM

[DanceswithDingoes]

You should be able to undo the small locking screws and rotate those 'modules' to the furthest holes and that should give you 26". If you are unsure then get it changed at a pro shop like Bill Pellegrino's on Ford St.