Info on C2

[fletcher]

Looking at an ultraelite has any one had any feedback on this bow with the C2 cam.How does the stop on the cam work ?

[OldDog]

Looking at an ultraelite has any one had any feedback on this bow with the C2 cam.How does the stop on the cam work ?
well I am sitting herre wondering what a c2 cam is, can someone enlighten me.:confused:

[DanceswithDingoes]

Its the new hoyt/darton hybrid cam and a half mk2, it has a redesigned profile for a little more speed (between a spiral and a C 1/2)

[Shermo]

Looking at an ultraelite has any one had any feedback on this bow with the C2 cam.How does the stop on the cam work ?

The 2007 bows haven't arrived over our way yet Fletcher, but as soon as my bows get here, Pro Elite XT2000 C2 and also a Vulcan with the Vector Cam I will do up a report to let you know how they go.

From the looks of it so far the C2 is going to have a similar solid/brick wall feel at full draw like the Spiral (which is very good:D) but a more gentle force draw curve. Also in the past the Spiral has been a 65% - 55% let off cam (changed by the draw stop peg and 1/2" in drawlength) while the C2 runs at 75% - 65% let off. And to answer how the stop works, there is a small peg/post on the cam, when the cam reaches the end of its cycle (full draw) it comes into contact with the cable stopping it from further rotating, this eliminates the spongy feeling.

[fletcher]

Thanks for your info Shermo,Looking foward to the review.
Read a little about C2 on Archery talk last night.The info was that the C2 was smooth and all the Hoyts stacked up pretty well. 75/65% should suit alot of people