ACE 670's

[Betty-Anne]

21 x ACE 670's. (I originally bought 2 dozen at the same time but the 2 sets have been mixed up) 28 1/2 inches measured from nock groove (actual bare shaft are 28 1/8") . At the moment have Beiter 12/1 insert nocks and screw-in points. I think the points are size 3(maybe 2). The point inserts are glued into the shafts with hot-melt glue and I've used a little bit of lock-tite on the screw in bits. Are all fletched with left-hand 45mm black spin wings. I will be more than happy to remove any of the 'bits' if need be.

AU$230 posted to anywhere in Australia

[CT]

Are you willing to split them into smaller lots?

They're about the spine that I'll need for my new bow (on order) but I don't want to fork out for them all to have a play in case I can't get them to work.

Cheers
Craig

[jmvargas]

may i know the condition of the shafts?...do they still have all the original markings?...how long did you use them?...thanks...PS..how many grains are the screw in pts?

[CT]

JMV,
By my reading of the Easton guide, size 2 points will be 31gr and size 3 points will be 36gr.

The insert will be either an H (39gr) J (49gr) or L(59gr), so the final point weight will depend on whatever combo was used.

Betty-Anne,
Any idea of the insert weight or overall point weight?

Cheers
Craig

[jmvargas]

thanks CT...i presume we can remove the screw-in inserts if we want to use break-off pts?

[Betty-Anne]

may i know the condition of the shafts?...do they still have all the original markings?...how long did you use them?...thanks...PS..how many grains are the screw in pts?

They're in really good condition. I only shot with them for a few months and then decided that they were a tad stiff. Alt Services must love me with all the arrows that I've bought in the last 18 months :)The inserts(J) and the screw in points (size 2) add up to 80 grains. The inserts are 49gr and the points 31gr. The inserts are glued into the shafts with hot melt glue so are easy to get out. The nocks aren't glued in at all, just pushed in and held tight with a tiny piece of dental floss:eek: Seems to work well.

[jmvargas]

thanks betty-anne...i have 1 doz new 670s which i plan to tune to my set-ups...if they work out well i mite be interested in some of yours if they are still available at that time....

[D10621]

Hi Betty, sent you a PM

[Betty-Anne]

Hi Betty, sent you a PM

Careful :)

[Betty-Anne]

The ACE's are sold!