PDA

View Full Version : DANAGE Field Target


Coghlan
11-01-2008, 09:29 PM
Here is a picture of the DANAGE field target at World Field Finals in 06.

Some may have shot at them in the Australasian Masters Games in Adelaide this year, they weigh approx 8 kilo's have a handle and can fit into a lot of cars without taking them apart. If you need to take them apart it takes approx 2-5min depending on how often you do it.

Approx price $425.00 inc Timber Ground Stand (as Pictured) , size 88cmx88cm, but you will not need to clean your arrows after using this Target and one person can pull the arrows out.

Replacement Centres 44cmx44cmx24.5cm deep are $140.00

Good Value, you can also if you want to buy a Target Stand ( so the centre is 1.3m off the ground) which turns it into a Target Buttress (remember it is still only 88cmx88cm however)

Just some more options :-)

Please note if you live in Victoria Urban Archery is the Dealer.

Coghlan
15-01-2008, 10:55 AM
This is a picture of the A-Frame and Powerstop as well, that way as well as using it as a field target it can also be used as a Range Target........

Steve B
15-01-2008, 11:36 AM
Pat, what would be the approx number of arrows the target will manage prior to requiring a replacement centre (talking field here rather than the target aspects) and I am guessing that the longevity would increase dramatically using the power stop?

Coghlan
15-01-2008, 11:47 AM
Yes the Powerstop does extend the life of the target average per core seems to be approx 5-7 thousand shots per core. the reason is that it absorbs the energy of the arrow.

basically if a Target a stops 100% of the energy then the same amount of energy will be required to pull it out.

In Danage case, lets say 50% of the energay is taken out by the Target and 50% by the Powerstop.

So the amount of energy you require to pull out the arrow is 50% of the first target......Jim park could probably make this more concise but I hope you get the gist.

Also this Target is TRUELY portable, it weighs under 8 kg (not inc the A Frame) and it has finished wood that fits into the care the blocks come apart in about the same time it would take average compound apart.

Pat

apexrob
15-01-2008, 12:46 PM
I've got the same target, i've put about 5500+ shots into the core and it's still going.

That being said i'm using x10 Protours only.

Here's a thread I started in sept 2007 on my DANAGE Target .......http://www.archery-forum.com/showthread.php?t=19065.