Cam & 1/2 V Spiral

[robbo]

When using the Easton arrow selector, would you class the Cam & 1/2 as a hard cam?

If you do what do you class the Spiral? :-?

[2Dogs]

Spiral is Hard, Cam .5 is medium to soft

[robbo]

Ok thanks.

I've worked out that they are harder than the Cam &c1/2. :D It has made my goldtips a bit soft. may have to look at other options.



Just wasn't sure whether the Cam & 1/2 was hard or medium.

[Ozzy]

Spiral is Hard, Cam .5 is medium to soft

That's interesting :o
I believe C.5 & Single Cams should be classed as "hard" cams for arrow selection :-?

[Barry]

I read somewhere they are medium to hard....

But then again two dogs has owned every version of them all so maybee he learnt something????

[robbo]

All I know is the spiral is definately harder than the cam & 1/2. :D

[rooster]

Are the spirals faster, after today my correct draw length will be sorted out once and for all, will the correct spirals give me more EDGE with my
Ultra xt200,28D/L,58lbs.( at present mycams are on *B*--27.5. my dloop is long new26m,if I can put the cams into *C*28ins shorten the Dloop I should gain some speed??) yes I'm in cam-deleamer, thanks.

[Marcus]

yes rooster, I gained about 12fps switching over to Spirals

[Axilla]

Rooster, first thing would be to shorten D-loop.

26m is far too long! :wink:

[Flame]

ideal for back blocks

You hold the bow and rooster goes back 26m :D

[rooster]

Marcus, just shot an indoor Aussie,(pb),my bow is Cam *B* (27.5ins?) from the back of the string at the nocking piont to the jaws of the of the release aid the D/loop a touch over 1inch, just worried my head is creaping forward, shall check with the 2wise men(OD_JAY) :wink: .
Shall take some photo's & vid when my Mrs gets back from mountain climbing,in the meantime any suggestions, thanks