bowtech pro40 wheely.

[Juggs]

Guys anyone shot the pro40 wheely.

am wanted a fita target bow and wheely seems to have quite a bit of speed for a semi round wheel bow.

[CMB50]

Nope, havn't shot it but certainly considered it.


Brace Height
7 1/4"

Draw weights
40#

[Eberbachl]

It does look the goods, but my preference on paper for a target bow would be the Bowtech Pro40 Freedom cam.

I haven't shot either bow yet, but based on the specs, I'd probably order the Pro40 Freedom Cam :wink:

It is a little slower, but still 292-300 and has an 8 1/4" brace height and nice axle to axle length.

They'd both be very good for target and may be the extra speed of the wheely would help with wind drift, but I can't help thinking the Freedom cam option would be a sweet shooter :D

Having said that - I shot a 298 indoor (not my best score, but it's getting there) with my Patriot Dually (326-334, 7 5/8" brace height) so it's actually shaping up to be quite a capable indoor and target bow also :wink:

[Shermo]

I have shot both bows, and it would not be an easy decision to make :wink:

Personally I would go with the Freedom Cam option. This being because of the rock solid stop, and super smooth shooting of the bow. It would be plenty fast for target. Also has the ease of Super fine draw length adjustments with the modules and adjustable draw stop.

The Wheely is a top bow also. It was a very easy bow to aim straight out of the box, and was also super smooth. Slightly better speed rating than the Freedom Cam, but not a lot of difference in the end, when let off can be adjusted with the draw stop on the Single cam option.

Like they said they are both great bows :D

Juggs give Shaun a call, both bows are in stock. You will just have to see what poundage bows he has on hand.

[Axilla]

What happened to the new dishwasher, Juggs? :D

Must admit that a Pro40 Freedom is much more desirable than a dishwasher :wink:

[Juggs]

what dishwasher

[Axilla]

The reason you sold the supertec?

[Juggs]

had a good year at work so to speak
so the missus gets a dishwasher and i get a bow

[Shermo]

Juggs, I will be bringing a Pro 40 Freedom Cam bow down to the Manly shoot next week. Should be able to get it down to around 58 pounds for you to have a try of :D

[StevenB]

I had a bit of a feel of one of the wheelies up at lake mac. And it is the goods. On paper there is not a lot of difference to my PSE Nova and it has the same feel on draw, I've got my eye set on one for the moment.

Was looking at the PRO40 wheelie that Shaun had, birth sheet was 290fps at 29" and 51lbs

[Juggs]

deals done

have a extreme vft infinity cam.
27inches 60 pounds
should be here monday