Invalid error 70 - Archery Forum

Brett k · 16-01-2010, 07:37 PM

I am trying to register my copy of accurate sights and I am only getting the message 'invalid error #70' can anyone help with this?

It is going to be real hard to shoot tomorrow without a tape.

James Park · 16-01-2010, 07:52 PM

Brett,
Which version are you using, and whicj operating system?
I will email you latest version is you wish (just PM me an email address).

dbjac · 16-01-2010, 08:04 PM

If you're on Vista, make sure you run the application by 'right click' the application and select 'run as administrator'.
I've found that clears up a lot of problems with Accurate Sights, particularly the printing of tapes.

Brett k · 16-01-2010, 08:12 PM

Thanks heaps for the fast reply guys. I tried just dumping it and re-installing, it seems to have done the trick.

Brett k · 16-01-2010, 09:57 PM

Nope I was wrong. When I re-started my computer it no longer works and the register button does not work either. I have a link to the latest version. It opens and I can put data in but I can't get it to register.

dbjac · 16-01-2010, 10:02 PM

What Operating System are you using?

Brett k · 16-01-2010, 10:05 PM

I'm on Vista and I tried the open as administrator but still no luck.

James Park · 16-01-2010, 10:22 PM

Brett,
What is your email address?
I will send you the Vista version.
You need version 6.1.1

BenDy · 17-01-2010, 08:09 AM

James,

Is there a Mac version of the software at all?

James Park · 17-01-2010, 01:24 PM

Ben,
No, just for PCs.

Julianh · 22-01-2010, 03:47 PM

Hi James,

I there likely to be Mac version any time in the future?

Thanks,

Julian

James Park · 24-01-2010, 06:09 PM

Julian,
I have thought about a Mac version, but not in the near future.

16-01-2010, 07:37 PM	#1
Brett k 2nd Class Join Date: Jul 2004 LAC Posts: 443 Rep Power: 43	Invalid error 70 I am trying to register my copy of accurate sights and I am only getting the message 'invalid error #70' can anyone help with this? It is going to be real hard to shoot tomorrow without a tape.

16-01-2010, 07:52 PM	#2
James Park Engineer & student Join Date: Jul 2001 • Hoyt Carbon Matrix • Protour size 420, X7's for indoor DVA Location: Glen Waverley, Australia Posts: 10,528 Rep Power: 13884	Brett, Which version are you using, and whicj operating system? I will email you latest version is you wish (just PM me an email address). __________________ Winners' Choice strings Shibuya sights Titan scopes

16-01-2010, 08:04 PM	#3
dbjac You know it! Join Date: May 2005 • '09 Red Ember VantageElite. • Easton 470 Protours, Tungsten. Moorabbin Archery Club. Location: Mentone Posts: 5,029 Rep Power: 25002	If you're on Vista, make sure you run the application by 'right click' the application and select 'run as administrator'. I've found that clears up a lot of problems with Accurate Sights, particularly the printing of tapes. __________________

16-01-2010, 10:02 PM	#6
dbjac You know it! Join Date: May 2005 • '09 Red Ember VantageElite. • Easton 470 Protours, Tungsten. Moorabbin Archery Club. Location: Mentone Posts: 5,029 Rep Power: 25002	What Operating System are you using? __________________

16-01-2010, 10:22 PM	#8
James Park Engineer & student Join Date: Jul 2001 • Hoyt Carbon Matrix • Protour size 420, X7's for indoor DVA Location: Glen Waverley, Australia Posts: 10,528 Rep Power: 13884	Brett, What is your email address? I will send you the Vista version. You need version 6.1.1 __________________ Winners' Choice strings Shibuya sights Titan scopes

16-01-2010, 08:12 PM	#4
Brett k 2nd Class Join Date: Jul 2004 LAC Posts: 443 Rep Power: 43	Thanks heaps for the fast reply guys. I tried just dumping it and re-installing, it seems to have done the trick.

16-01-2010, 09:57 PM	#5
Brett k 2nd Class Join Date: Jul 2004 LAC Posts: 443 Rep Power: 43	Nope I was wrong. When I re-started my computer it no longer works and the register button does not work either. I have a link to the latest version. It opens and I can put data in but I can't get it to register.

16-01-2010, 10:05 PM	#7
Brett k 2nd Class Join Date: Jul 2004 LAC Posts: 443 Rep Power: 43	I'm on Vista and I tried the open as administrator but still no luck.

17-01-2010, 08:09 AM	#9
BenDy Conversation Assassin. Join Date: Jun 2009 • Fiberbow 5.99/990TX • ACG's Mana AC Location: Kapiti Coast - NZ Posts: 1,042 Rep Power: 1348	James, Is there a Mac version of the software at all? __________________ Actioni Contrarium Semper et Aequalem Esse Reactionem __________________ All men dream, but not equally. Those who dream by the night in the dusty recesses of their mind wake in the day to find that it was vanity. But the dreamers of the day are dangerous men, for they may act their dreams with open eyes, to make it possible. -T.E. Lawrence. The Seven Pillars of Wisdom Last edited by BenDy; 22-01-2010 at 04:20 PM.

17-01-2010, 01:24 PM	#10
James Park Engineer & student Join Date: Jul 2001 • Hoyt Carbon Matrix • Protour size 420, X7's for indoor DVA Location: Glen Waverley, Australia Posts: 10,528 Rep Power: 13884	Ben, No, just for PCs. __________________ Winners' Choice strings Shibuya sights Titan scopes

22-01-2010, 03:47 PM	#11
Julianh Mine's a Hoyt! Join Date: Jun 2008 • Vantage Elite • Protour X10 Yarra Bowmen Location: Melbourne, Australia Posts: 68 Rep Power: 118	Hi James, I there likely to be Mac version any time in the future? Thanks, Julian

24-01-2010, 06:09 PM	#12
James Park Engineer & student Join Date: Jul 2001 • Hoyt Carbon Matrix • Protour size 420, X7's for indoor DVA Location: Glen Waverley, Australia Posts: 10,528 Rep Power: 13884	Julian, I have thought about a Mac version, but not in the near future. __________________ Winners' Choice strings Shibuya sights Titan scopes

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode